5
System Overview
The following sections provide or point to an overview of the rp7400 server hardware and software.
Hardware overview
For an overview of the Enterprise Server Family hardware go to http://www.hp.com/go/hp9000_servers-docs
For an overview of the HP-9000 or HP e3000 rp7400 Server hardware go to http://www.hp.com/go/hp9000_servers-docs
Software Overview
The HP-9000 rp7400 server is designed to operate using HP-UX version 11.0 or newer.
The HP e3000 rp7400 is designed to operate using MPE/iX release 7.0 (uni-processor support) and MPE/iX
release 7.0 express (multi-processor support).
NOTE All references to rp7400 are equally applicable to the HP e3000 and n4000.
KEY:
X - Supported with MPE/iX 7.0
X* - Supported with MPE/iX 7.0 Express 1 Release
X1 - Supported with MPE/iX 7.5 or later
NOTE 1 and 2 way 550 MHz and 750MHz servers are not supported.
Table 1
Processor
Speed
Number of Processors Supported
220MHz1234567
330MHz X
380MHz X
440MHz X1 X1
500MHz X* X* X* X*
550MHz X* X*
750MHz X1 X1
To Next Page
Loading...
Need help?
General