75
Identify Telephone Requirements and Define
Remote Access
At least two communication lines are required for rp7400 servers: one for
the remote console facility, and another for UUCP. HP rp7400 servers
provide remote console access via a modem for the secure console LAN,
which is separate from the site or computer room’s campus LAN.
NOTE If modem access is an element of the customer’s High
Availability plan, telephone lines for multiple modems
may be required
The system internal modem is equipped with an RJ11 telephone
connector. For North American installations, the customers telephone
jack must comply with RJ11 specifications. (The RJ11 connectors are the
small, quick-disconnect type, not the large 4-pin type.) Otherwise, the
modem cannot be connected.
To Next Page
Loading...
