38
Local Codes
Special local codes exist in some locations regulating the installation of
computer equipment. The customer is responsible for making sure their
computer system installation is in compliance with all local laws,
regulations, and codes for mechanical, building, and electrical
distribution systems prior to system installation. The Hewlett-Packard
Site Preparation Specialist can assist you in determining your local
regulations.
Data Communications Equipment
The customer is responsible for ordering and installing all required data
communications equipment such as:
• Any hardware or cables for connection or installation of data
communications equipment
•Network Links
• Telephone equipment
• Modems (Consult with the Site Preparation Specialist for
Hewlett-Packard requirements.)
• Equipment supplied by companies other than HP
Communications equipment at the computer site is not part of the
computer and must be considered separately for power, space, interface
cables, and cooling requirements.
Selection of Site Personnel
Depending on the complexity of the computer system, the customer is
responsible for selecting a Site Coordinator, Principal Operator, and a
Site Planning Team. Depending on customer requirements, the Principal
Operator may or may not perform all of these tasks. In some
installations there may be two or three people assigned to the various
“operator” responsibilities.
Site Coordinator
The Site Coordinator is responsible for the following tasks:
• Establishing and maintaining site preparation schedules
To Next Page
Loading...
Need help?
General