HP Series 200 - Page 138

Clear/Reset ...1-22
clearing the router ...1-22
clock, router ...2-19
collisions ...2-9, 3-5
command
Atping ...1-43
Boot ...1-31, 3-5
Crash ...3-5
Exit ...1-33
FDDI get ...3-17
get ...3-17
Ping ...1-43, 3-16, 3-18
Rget, enabled ...1-41
Telnet ...3-19
Time ...1-33
communications standards ...C-4
compatibility
See data communications specifications
concentrator, FDDI ...D-4
configuration ...1-28 -- 1-30
activating ...1-28
automatic ...2-17
Bootp server ...1-5, 1-10, 1-28
clear ...2-14
default ...1-28, 2-14, 2-17
from another router ...1-4
from remote site ...1-5
intermediate ...1-22
minimal ...1-22, 1-28
modem ...B-1 -- B-3
process ...1-29
Quick remote ...1-4 – 1-5, 1-10, 1-22, 1-28,
2-17
terminal ...1-10
Configuration Editor ...1-28 -- 1-29
configuration, corrupted ...3-14
connector
AUI ...1-12
BNC ...1-14, 1-15
See also WAN, LAN, BNC, AUI
Console ...1-10, 3-3, A-3 -- A-7, A-20
baud rate ...2-3
boot failure ...1-25
loopback connector ...A-20
optional ...1-5 -- 1-6, 1-10
port ...2-3
RS-232 interface ...2-3
console cable ...3-12 -- 3-13
console port, test ...3-12
Copyright ...1-2
copyright screen ...1-25, 1-32
cord, power ...1-3
Crash command ...3-5
crossover cable
See null modem cable
current ...C-2
D
DAS ...
See FDDI
data communications certification
for UK ...C-4
data communications specifications ...C-4
date
See time
declaration of conformity ...S-9 -- S-10
DECnet ...2-2
DEFAULT_CONFIG ...1-30
deferrals ...2-9
diagnostic test ...3-10 -- 3-19
dimensions ...C-2
disable port ...1-28
documentation ...1-3
double-height router ...1-9, 1-24
double-height router, back panel ...2-6
double-height router, LEDs ...2-7
DSU/CSU ...1-21 – 1-22
dual attach
See FDDI DAS.
dual-attach station ...1-17
See FDDI DAS
dual-homed connection ...D-5
E
electromagnetic specifications ...C-3
emissions specifications ...C-3
environmental specifications ...C-3
error message ...3-6 – 3-8
error number ...3-6
Index
2