HP Series 200 - Resetting the Router, Clearing the Passwords, and Clearing the Router

Resetting the Router, Clearing the
Passwords, and Clearing the Router
Resetting the router: Boots the router, regardless of the current
operating mode.
Clearing the password(s): Removes the current password(s), if any,
without interrupting the current state of the router. This protects you
from being denied console, Telnet, TFTP, or network manger access if
you have forgotten the password(s).
Clearing the router: Removes the current password(s), erases the
current configuration, and boots the router in its default (factory)
configuration. Use this feature only if you are prepared to lose the
router’s current configuration.
The Reset and Clear buttons are located to the left of the console port:
Figure 2-7. Location of the Reset and Clear Buttons
Router Operation
Resetting the Router, Clearing the Passwords, and Clearing the Router
2-14