Speakers, front
Description Spare part number
Speakers, front (include left and right speakers and cables) 907343-001
Before removing the front speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 22).
5. Remove the battery (see Battery on page 24).
Remove the front speakers:
1. Remove the RTC battery cable from clip in the right speaker (1).
2. Disconnect both speaker cables (2) from the system board (to avoid system board damage, see step 5).
3. Remove the two Phillips PM2.0×3.5 screws (3) and the two Phillips PM1.6×2.0 screws (4) that
secure the speakers to the computer.
4. Remove the speakers (5).
Speakers, front 31