HP Spectre x360 13-w000 User Manual

TouchPad
Description Spare part number
TouchPad 907338-001
TouchPad cable 907332-001
Before removing the TouchPad, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 22).
5. Remove the battery (see Battery on page 24).
Remove the TouchPad:
1. Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then
disconnect the cable from the TouchPad.
2. Remove the ve Phillips PM2.0×2.0 screws (2) that secure the TouchPad to the computer.
3. Remove the TouchPad and cable (3).
Reverse this procedure to install the TouchPad.
TouchPad 33

HP Spectre x360 13-w000 Specifications

General

Brand	HP
Model	Spectre x360 13-w000
Category	Laptop
Language	English