Speakers
Description Spare part number
Speakers (include left and right speakers and cables) 801501-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 19).
5. Disconnect the battery cable from the system board (see Battery on page 21).
Remove the speakers:
1. Disconnect the speaker cables (1) from the system board.
2. Remove the three Phillips PM2.0×2.7 screws (2) that secure the speakers to the top cover.
3. Remove the speakers (3).
Reverse this procedure to install the speakers.
26 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
