A Scanning safety information
Carefully read all of the following safety precautions before using the Sprout 2D calibration, 3D calibration,
and 3D Capture scans.
WARNING! Photosensitive Epileptic Seizures—A very small percentage of individuals may experience a
seizure or other complications when exposed to certain visual images, including ashing lights or patterns
that may appear during Sprout 2D and 3D calibration, and/or 3D Capture scans. If you, or any user, have a
history of seizures or epilepsy, consult a physician before using Sprout calibration or 3D Capture scan
functionality. Even those without a personal family history of epilepsy or stroke may have an undiagnosed
condition that can cause photosensitive epileptic seizures.
If you experience any of the following symptoms, immediately stop using Sprout calibration or 3D
scanning functionality and consult a physician:
●
Altered vision
●
Light-headedness
●
Dizziness
●
Involuntary movements such as eye or muscle twitching
●
Nausea
●
Convulsions
●
Loss of awareness
●
Confusion
●
Cramps
●
Disorientation
Resume Sprout usage only on approval of your physician.
Parents should monitor and ask their children if they have any of the above symptoms. Children and
teenagers may be more likely than adults to experience these symptoms.
The vision of young children (especially children under the age of 6) is still under development. Consult your
physician (such as a pediatrician or eye doctor) before allowing young children to use Sprout calibration or
scanning functionality.
To help reduce the likelihood of adverse physical reactions:
●
Use in a well-lit area and do not look directly at the Sprout or the light patterns generated by the Sprout
during calibration or 3D scans.
●
Avoid prolonged use of the 3D scanning process.
●
Take a 15-minute break during each hour of Sprout use. The length and frequency of necessary breaks
may vary from person to person. Please take breaks that are long enough to allow any discomfort to
subside. If symptoms persist, consult a physician.
●
Avoid calibrating Sprout or producing 3D scans when you are tired or need sleep.
53
To Next Page
Loading...
Need help?
General
Weight and Dimensions
