HP StorageWorks 8/20q

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide 77
Editing RADIUS server information
Editing information of a RADIUS server involves changing the configuration of a RADIUS server.
Figure 40 Radius Server Information dialog box—Edit server
To edit information of a RADIUS server:
1. Select a switch in the fabric tree.
2. Select Switch > Radius Servers to open the Radius Server Information dialog box (Figure 40).
3. Click the Edit Server tab, and select the server to be edited In the server list at the top of the dialog box.
4. Make changes to the Server Address, UDP Port, Timeout, Retries, or Secret field.
5. Select the server type (Device, User, Account) and Sign Packets options.
6. Click Edit Server to save the changes.
7. Click Close to exit the dialog box.