HP StorageWorks P9000 - Disk Arrays User Manual (English)

Other manuals for HP StorageWorks P9000 - Disk Arrays

Manual316 pages

Reference Guide222 pages

User Guide193 pages

Configuration Guide56 pages

Questions and Answers:

A
Ashley ButlerSep 1, 2025
What to do if the HP Storage pair create or pair resync operation resulted in a timeout error?
- D
  David MartinSep 1, 2025
  To resolve a timeout error during a pair create or resync operation on your HP Storage system, first, if a SIM was generated due to a hardware failure, contact HP Technical Support and retry the operation after the issue is resolved. If no SIM was generated, wait 5-6 minutes and check the pair status. If the status changed correctly, the operation completed after the timeout. If the status didn't change, retry the operation during a lighter workload. For communication errors between the Remote Web Console and the SVP, consult the HP StorageWorks P9000 Remote Web Console User Guide.
J
John HughesSep 2, 2025
What to do if a Cnt Ac-J error message appears on the HP StorageWorks P9000 - Disk Arrays Remote Web Console computer?
- S
  Stacy JonesSep 2, 2025
  If you encounter a Cnt Ac-J error message on the Remote Web Console computer, identify and remove the cause of the error. After addressing the cause, retry the Cnt Ac-J operation.
R
Robert DuranSep 3, 2025
Why did the HP StorageWorks P9000 - Disk Arrays Storage primary system suspend a pair because of an error at the secondary storage system?
- J
  Jennifer GarrettSep 3, 2025
  If the HP Storage primary system suspended a pair due to an error condition at the secondary storage system, clear the error at the secondary storage system or S-VOL. If you need to access the S-VOL, release the pair from the primary storage system. If data in the S-VOL has been changed, release the pair and recreate it using the Paircreate dialog box. If data hasn't been changed, restore the pair from the primary storage system.
K
Kimberly SmithSep 4, 2025
What to do if the HP StorageWorks P9000 - Disk Arrays primary system detected an error during communication with the secondary storage system?
- J
  Jacqueline GonzalezSep 4, 2025
  If the HP Storage primary system detected an error during communication with the secondary storage system or an I/O error during update copy, check the path status in the DKC Status dialog box. Clear any error conditions at the secondary storage system and the S-VOL. If you need to access the S-VOL, release the pair from the secondary storage system. If data in the S-VOL has been changed, release the pair from the primary storage system and then re create the pair by using the Paircreate dialog box. If data has not been changed, restore the pair from the primary storage system.
D
Dylan RobinsonSep 5, 2025
What to do if the HP StorageWorks P9000 - Disk Arrays primary system suspended a pair during the initial copy operation?
- C
  Charles MckinneySep 5, 2025
  If the HP Storage primary storage system suspended this pair during the initial copy operation because the data on the S-VOL is not identical to the data on the P-VOL, release the pair from the primary storage system. Clear all error conditions at the primary storage system, P-VOL, secondary storage system, and S-VOL. Restart the initial copy operation using the Paircreate dialog box.
T
Timothy LeeSep 19, 2025
How to resolve communication failures due to secondary system or network issues on HP StorageWorks P9000 - Disk Arrays?

HP StorageWorks P9000 - Disk Arrays Specifications

General

Form Factor	Rack-mountable
Model	HP StorageWorks P9000
Type	Disk Array
Category	Storage
Drive Type	SSD, SAS
RAID Levels	RAID 0, 1, 5, 6, 10
Host Interface	Fibre Channel, FCoE, iSCSI
Connectivity	Fibre Channel, FCoE, iSCSI
Cache Memory	Up to 512 GB
Controllers	Dual controllers
Management Software	HP StorageWorks Command View
Redundancy	controllers, power supplies, and fans
Operating Humidity	20 to 80% relative humidity, non-condensing