2. If the use of the mto edit interface is declared with reference to the Parameter Definition file (which
the user creates in advance), the File Conversion Utility will extract the data for one record, and
will pass record data to Code Converter.
The following steps represent the processing range of Code Converter:
1. Code Converter extracts data for one field, and then determines the type of conversion specified
referring to the Field Definition file (which a user creates in advance). Convert double-byte or
other characters referring to the Field Definition file and the Edit Option file (standard file provided).
2. Repeat the extraction processing and conversion processing of steps 3 and 4 for all the fields in
the record.
3. Code Converter returns the data after conversion to Data Exchange, after ending conversion
processing of all the fields for one record.
4. The File Conversion Utility outputs the data for the record to a server file (UNIX, etc.).
(The process repeats iteratively.)
P9000 Data Exchange Code Converter User Guide 17
To Next Page
Loading...
