HP StorageWorks P9000 User Manual

322 pages

To Next Page

To Previous Page

• end: the rest of the record starting from the beginning of this field is defined as an input field. The

field length depends on the record format, as follows:

• Fixed length record: (byte length of input field) = (input record length) – (relative byte position

within the record)

• Variable length record: (byte length of input field) = (the length after code conversion)

NOTE:

You cannot perform numeric conversion on a variable length record field with “end” specified. Numeric

conversion can only be performed on fixed length records.

End Statement

A line for an end statement is written at the end, after field definition statements are specified for all

fields in the input record (Figure 28).

Figure 28 End Statement

• end: Keyword (reserved word) to indicate that all field definition statements have been written.

• Delimiter = delimiter_code: Specify a delimiter code as follows, if a delimiter is added to the end

of the open systems records:

• To add CR = (0D) - Delimiter = CR

• To add LF = (0A) - Delimiter = LF

• To add CRLF = (0D0A) - Delimiter = CRLF (Only for Windows)

• Padding = padding_code: When converting variable length open systems records to fixed length

Mainframe records, specify a padding code with a 2-digit hexadecimal character, to fill the space

between the last field to convert and the end of the Mainframe record.

NOTE:

When adding a delimiter, the output record length increases/decreases accordingly.

Take this into consideration when specifying the output length. When the input record contains binary

data in addition to single-byte and/or double-byte characters, the binary data may include data that

matches the delimiter specified. This may prevent correct recognition of delimiters to isolate records.

Comments

Comments can be included as necessary, within a field definition statement (at the end of the statement),

or separately as a comment statement (Figure 29).

• When including a comment within a field definition statement, add the comment after the required

items of the statement (5 parameters).

• When the byte length of the output field is omitted, “#” can be specified in its place to indicate

that subsequent data is a comment.

• When “#” is specified at the beginning of a line, the entire line is becomes a comment.

P9000 Data Exchange Code Converter User Guide 45

Other manuals for HP StorageWorks P9000

Configuration Guide165 pages

Manual333 pages

Software Installation Guide128 pages

Integration Guide29 pages

Reference Guide399 pages

Questions and Answers:

M
Molly OwensSep 18, 2025
How to fix failed to output characters for code conversion table in HP StorageWorks P9000 Storage?

HP StorageWorks P9000 Specifications

General

RAID Support	RAID 0, 1, 5, 6, 10
Interface	Fibre Channel, iSCSI, FCoE
Form Factor	Rack-mountable
Model	P9000
Operating System Compatibility	Windows, Linux, VMware, HP-UX
Host Interface	Fibre Channel, iSCSI, FCoE
Drive Interface	SAS, SSD
Drive Types Supported	SSD, SAS
Redundancy	Redundant controllers, power supplies, and fans
Management Software	HP StorageWorks Command View