DescriptionParameter valueConversion Mode Parameter
Insert sign before
effective digits (only
applicable to zero
suppressed fields).
TRAN_SIGN_V
Unsigned.TRAN_SIGN_NON
Specifies the number of
decimal digits between
0 and 9.
1-digit decimal characterDecimal digits
Does not perform zero
suppression.
TRAN_NON_SUPPRESS
Zero suppression
Performs zero
suppression.
TRAN_ZERO_SUPPRESS
Indicated with C (otm
conversion only).
TRAN_SIGN_PLUS_C
Type of plus sign*
Indicated with A (otm
conversion only).
TRAN_SIGN_PLUS_A
Indicated with E (otm
conversion only).
TRAN_SIGN_PLUS_E
Indicated with F (otm
conversion only).
TRAN_SIGN_PLUS_F
Indicated with D (otm
conversion only).
TRAN_SIGN_MINUS_D
Type of minus sign*
Indicated with B (otm
conversion only).
TRAN_SIGN_MINUS_B
In otm conversion, a field
that only contains spaces
generates an error. In
mto conversion, a field
that only contains 0
outputs a 0.
TRAN_ALLSPACE_NORMAL
All-space fields
In otm conversion, a field
that only contains spaces
outputs a 0.
TRAN_ALLSPACE_ZERO
* Parameter applicable to otm conversion. In mto conversion, signs are determined automatically.
P9000 Data Exchange Code Converter User Guide 53
To Next Page
Loading...
