Ultrium 960, Ultrium 448, Ultrium 460, Ultrium 230, DLT VS80, SDLT 320 45
To use this option:
1. From the Home screen or Main menu, press + or - until Information displays on the top line
of the LCD screen. Press Enter to access the available options.
Ultrium 960 and Ultrium 448 only: Press + or - until Loader Info displays on the top line of
the LCD screen. Press Enter to select.
2. Press + or - until Firmware Rev displays on the LCD screen. The LCD screen displays the
version of the firmware currently installed in the autoloader.
3. Press Cancel.
NOTE: The firmware revision displayed on the LCD may not be updated until the autoloader is
power cycled.
To Next Page
Loading...
Need help?
General