Figure 23 HP StoreEasy 1430 with P421 and P222 controllers
1. D6000 Disk Enclosure
2. Connection between SAS port 1 on the primary I/O module (Drawer 2) and the P421 controller
3. P421 controller
4. P222 controller
5. Connection between SAS port 1 on the primary I/O module (Drawer 1) and the P421 controller
6. Connection between the P222 controller and port 2 on I/O module of D2600 Disk Enclosure 1
7. D2600 Disk Enclosure 1
8. Connection between port 1 of I/O module B on D2600 Disk Enclosure 1 and port 2 of I/O module A on D2600
Disk Enclosure 2
9. D2600 Disk Enclosure 2
NOTE: The cabling diagram shown in Figure 24 (page 27) is exactly the same for the HP
StoreEasy 1830 using the P822 controller.
26 Installing and configuring the storage system
To Next Page
Loading...
