HP StoreEasy 1000 - Single Domain Cabling Diagrams with D2000 Disk Enclosures

Figure 24 HP StoreEasy 1630 with the P822 controller
1. D6000 Disk Enclosure 1
2. D6000 Disk Enclosure 2
3. Connection between the P822 controller and SAS port 1 on the primary I/O module (Drawer 2) of D6000 Disk
Enclosure 1
4. P822 controller
5. Connection between the P822 controller and SAS port 1 on the primary I/O module (Drawer 2) of D6000 Disk
Enclosure 2
6. Connection between the P822 controller and SAS port 1 on the primary I/O module (Drawer 1) of D6000 Disk
Enclosure 2
7. Connection between the P822 controller and SAS port 1 on the primary I/O module (Drawer 1) of D6000 Disk
Enclosure 1
Single domain cabling diagrams with D2000 Disk Enclosures
The following diagrams show different StoreEasy systems in single domain configurations with the
D2000 Disk Enclosure. With these cabling diagrams, SAS daisy chains are used to connect the
disk enclosures together.
NOTE: The cabling diagram in Figure 25 (page 28) is exactly the same for the HP StoreEasy
1430 using the P222 controller.
Cabling the storage system 27