HP StoreEasy 1000 - Page 85

Table 5 Storage Management Provider errors
Recommended actionError messageError code
Please restart HP Storage Management Service.Error during discovery.0x24005001
Please restart HP Storage Management Service.Error while parsing CLI output.0x24005003
Error while parsing CLI output.0x20005003
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The controller specified was not found.0x25005008
The specified RAID level is invalid.0x20005009
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The specified RAID level is invalid.0x25005009
Please retry the operation.The operation is not supported because the storage
pool is unhealthy.
0x2300500B
Please retry the operation.The operation is not supported because the storage
pool is transforming.
0x2300500C
Please retry the operation.The physical drive specified is already in use.0x2300500D
Please retry the operation.Less than the minimum number of physical drives
was specified.
0x2300500E
Please retry the operation.The specified physical drives are unsupported for
this operation. They may either be in use or are a
mismatch.
0x2300500F
Please restart HP Storage Management Service.The physical disk was not found in the provider
cache.
0x24005011
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
The physical disk was not found in the provider
cache.
0x25005011
Please restart HP Storage Management Service.No physical disks were found in the logical drive.0x24005012
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to update pool in cache.0x25005013
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the pool from the controller.0x25005014
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to delete the pool from cache.0x25005015
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the pool IDs for the subsystem from
the controller.
0x25005016
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the associated pool for the LUN from
cache.
0x25005017
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to update disk in cache.0x25005018
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Failed to get the disk from the controller.0x25005019
Error codes 85