HP Storevirtual 4000 - Checking Status of Dedicated Boot Devices

HP StoreVirtual Storage 1U System (4130, 4330 and 4335)
Front View: Rear View:
1. Hood Cover 1. FlexibleLOM ports (4 ports 1Gb each)
2. 4130 and 4330: One (1) Single CPU - Intel Xeon E5-2620
processor
4335: One (1) Single CPU - Intex Xeon E5-2640 processor
2. Dual-port 8Gb Fibre Channel (4330 FC only)
3. Video connector (requires Front Video Adapter Kit) 3. Video Connector
4. Slide-out System Insight Display (SID) 4. Serial connector
5. Hard Drive Bays 5. Dual-port 10Gb Ethernet (optional on 4330, Standard on
4330 FC)
6. Removable hot-plug fan modules for easy serviceability 6. iLO Management Engine NIC connector
7. 24 DIMM slots: DDR3 Registered (RDIMM), Load Reduced
(LRDIMM) or Unbuffered (UDIMM) memory
7. Unit ID LED/button
8. Redundant Hot Plug Platinum Plus Power Supplies 8. 4 USB connectors (not used for storage operation)
9. Removable Riser Cage assembly for 2 x PCIe 3.0
Slots
9. Power supply bay 2
10. Fibre Channel and 10Gb Ethernet cards 10. Power supply bay 1
11. Active Health and Network Status LEDs 11. Power Supplies Health/Activity Indicators
HP StoreVirtual Storage 2U System (4530 and 4730)
QuickSpecs
HP StoreVirtual 4000 Storage
Configuration Information
DA - 14437 Worldwide — Version 13 — December 9, 2013 Page 26