4. Remove the speakers (4).
Reverse this procedure to install the speakers.
RTC battery
Description Spare part number
RTC battery (includes cable and double-sided adhesive) 830764-001
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 30).
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
38 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
Need help?
General
