Cleaning
Exterior surfaces and scan windows exposed to spills, smudges or debris require periodic cleaning to
ensure best performance during scanning operations. Contacts on the scanner and the base should
also be cleaned as needed to ensure a good connection.
Figure 3-1 Cleaning
Use a soft, dry cloth to clean the product. If the product is very soiled, clean it with a soft cloth
moistened with a diluted non-aggressive cleaning solution or diluted ethyl alcohol.
CAUTION: Do not use abrasive or aggressive cleansing agents or abrasive pads to clean scan
windows, contacts, or plastics.
Do not spray or pour liquids directly onto the unit.
8 Chapter 3 Safety and Maintenance
To Next Page
Loading...