HP x2301 User Manual

Icon Main Menu Options Sub-menu Options Description
Sharpness Adjusts the screen image to look sharper
or soft.
Dynamic Contrast Ratio Sets the Dynamic Contrast Ratio (DCR)
setting on or off. The factory default
setting is off. DCR automatically adjusts
the balance between white and black
levels to provide you with an optimal
image.
OSD Control Adjusts the position of the OSD menu on
the screen.
Horizontal OSD Position Changes the viewing position of the OSD
menu to the left or right area of the
screen. The factory default range is 94.
Vertical OSD Position Changes the viewing position of the OSD
menu to the top or bottom area of the
screen. The factory default range is 17.
OSD Transparency Adjust to view the background
information through the OSD.
OSD Timeout Sets the time in seconds that the OSD is
visible after the last button is pressed. The
factory default is 30 seconds.
Management Selects the power-management features
of the monitor.
Power Saver Enables the power saving feature (see
Power-Saver Feature on page 18).
Select:
On
Off
The factory default is On.
Power-On Recall Restores power to the monitor following
an unexpected removal of power. Select:
On
Off
The factory default is On.
Mode Display Displays the resolution, refresh rate, and
frequency information on the screen each
time the OSD Main Menu is accessed.
Select:
On
Off
The factory default is On.
ENWW
Using the On-Screen Display (OSD)
15

HP x2301 Specifications

General

Brand	HP
Model	x2301
Category	Monitor
Language	English