The command device is defined using the system raw device name (character-type device file
name). For example, the command devices for the following figure would be:
• HP-UX:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1 HORCM_CMD of HOSTB =
/dev/rdsk/c1t0d1
• Solaris:
HORCM_CMD of HOSTA = /dev/rdsk/c0t0d1s2 HORCM_CMD of HOSTB =
/dev/rdsk/c1t0d1s2
For Solaris operations with RAID Manager version 01-09-03/04 and higher, the command device
does not need to be labeled during format command.
• AIX:
HORCM_CMD of HOSTA = /dev/rhdiskXX HORCM_CMD of HOSTB = /dev/rhdiskXX
where XX = device number assigned by AIX
• Tru64 UNIX:
HORCM_CMD of HOSTA = /dev/rrzbXXc HORCM_CMD of HOSTB = /dev/rrzbXXc
where XX = device number assigned by Tru64 UNIX
• DYNIX/ptx:
HORCM_CMD of HOSTA = /dev/rdsk/sdXX HORCM_CMD of HOSTB = /dev/rdsk/sdXX
where XX = device number assigned by DYNIX/ptx
• Windows 2000/2003/2008:
HORCM_CMD of HOSTA = \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of HOSTB =
\\.\CMD-Ser#-ldev#-Port#
• Windows NT:
HORCM_CMD of HOSTA = \\.\CMD-Ser#-ldev#-Port# HORCM_CMD of HOSTB =
\\.\CMD-Ser#-ldev#-Port#
• Linux, z/Linux:
HORCM_CMD of HOSTA = /dev/sdX HORCM_CMD of HOSTB = /dev/sdX
where X = device number assigned by Linux, z/Linux
• IRIX:
HORCM_CMD for : HOSTA/dev/rdsk/dks0d0l1vol or /dev/rdsk/node_wwn/lun1vol/c0p0
HORCM_CMD for : HOSTB/dev/rdsk/dks1d0l1vol or /dev/rdsk/node_wwn/lun1vol/c1p0
Figure 18 Continuous Access Synchronous remote configuration example
66 Sample configuration definition files
To Next Page
Loading...
