HP XP P9500 - Functions That Support Disaster Recovery

For Windows: set HORCC_MRCF=1
• Designate a group name (Oradb1) and a local host P-VOL a case.
# paircreate -g Oradb1 -vl
This command creates pairs for all LUs assigned to group Oradb1 in the configuration definition
file (two pairs for the configuration in the above figure).
• Designate a volume name (oradev1-1) and a local host P-VOL a case.
# paircreate -g Oradb1 -d oradev1-1 -vl
This command creates pairs for all LUs designated as oradev1-1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
• Designate a group name, and display pair status.
# pairdisplay -g Oradb1
Group PairVol(L/R) (Port#,TID,LU-M), Seq#,LDEV#..P/S, Status, Seq#,P-LDEV# M
oradb1 oradev1-1(L) (CL1-A, 1, 1 - 1) 30053 18..P-VOL COPY 30053 22 -
oradb1 oradev1-1(R) (CL2-C, 2, 1 - 0) 30053 22..S-VOL COPY ----- 18 -
oradb1 oradev1-2(L) (CL1-A, 1, 2 - 1) 30053 19..P-VOL COPY 30053 23 -
oradb1 oradev1-2(R) (CL2-C, 2, 2 - 0) 30053 23..S-VOL COPY ----- 19 -
Example of RAID Manager commands with HOSTC (group Oradb1):
• When the command execution environment is not set, set HORCC_MRCF to the environment
variable.
For C shell: # setenv HORCC_MRCF 1
For Windows: set HORCC_MRCF=1
• Designate a group name and a remote host P-VOL a case.
# paircreate -g Oradb1 -vr
This command creates pairs for all LUs assigned to group Oradb1 in the configuration definition
file (two pairs for the configuration in the above figure).
• Designate a volume name (oradev1-1) and a remote host P-VOL a case.
# paircreate -g Oradb1 -d oradev1-1 -vr
This command creates pairs for all LUs designated as oradev1-1 in the configuration definition file
(CL1-A,T1,L1 and CL1-D,T2,L1 for the configuration in the above figure).
• Designate a group name and display pair status.
# pairdisplay -g Oradb1
Group PairVol(L/R) (Port#,TID,LU-M), Seq#, LDEV#..P/S, Status, Seq#, P-LDEV# M
oradb1 oradev1-1(L) (CL2-C, 2, 1 - 0) 30053 22..S-VOL COPY ----- 18 -
oradb1 oradev1-1(R) (CL1-A, 1, 1 - 1) 30053 18..P-VOL COPY 30053 22 -
oradb1 oradev1-2(L) (CL2-C, 2, 2 - 0) 30053 23..S-VOL COPY ----- 19 -
oradb1 oradev1-2(R) (CL1-A, 1, 2 - 1) 30053 19..P-VOL COPY 30053 23 -
Example of RAID Manager commands with HOSTA (group Oradb2):
• When the command execution environment is not set, set HORCC_MRCF to the environment
variable.
For C shell: # setenv HORCC_MRCF 1
Examples of RAID Manager configurations 77