Working with non-hp papers –Version for firmware 3.x
7. Check your ICC profile settings.
8. The printer will then perform the color calibration for your custom paper (maximum
density and linearity for each ink), which will ensure the best possible output quality.
9. Lastly, the HP Color Center will automatically install the profile in the computer that has
launched the process. If you are using your printer from another computer, remember
to synchronize papers before moving forward. The process is now complete.
Steps for Windows users:
1. Select your Paper Type from Front Panel. “NON-HP PAPERS & PAPER SETTINGS
RECOMMENDED” (Page 2 and 3)
2. Open Easy Printer Care, select “Install ICC Profile”. There you will find the following
options.
Hewlett-Packard
19
To Next Page
Loading...
