a. Use a plastic tool to disengage the bezel starting at the top (1), left and right sides (2), and bottom
(3).
b. Remove the display bezel (4).
The display bezel is available using the following spare part numbers:
850119-001: Models with a webcam
848368-001: Models without a webcam
5. If it is necessary to replace the display panel:
a. Remove the four Phillips screws (1) that secure the display panel to the display enclosure.
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
68 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
