To Next Page

To Previous Page

2. If your monitor has the ability to swivel, adjust it to the left or right for the best viewing angle.

Figure 3-20 Adjusting the Viewing Angle (Select Models)

3. Models ZR2240w, ZR2440w, and ZR2740w provide for height adjustment. Adjust the monitor's

height so that it is parallel to your eye height for a comfortable viewing position. A lock-down/

release button on the back of the column prevents the display head from sliding up when the

monitor is lifted. If the display head is locked in the lowest position, relase and adjust it as follows:

Figure 3-21 Adjusting the Height (Select Models)

a. Make sure that the monitor is safely positioned on a stable surface.

b. Gently push down on the display head (1).

c. While pushing down the display head, press the lock-down/release button on the back of the

column (2).

d. Guide the display head up to the desired height (3).

4. The default orientation of the monitor is landscape. If you want to change to portrait, follow the

instructions in the next section,

Portrait Orientation on page 24.

ENWW

Adjusting the Monitor

Other manuals for HP ZR2740w

Questions and Answers:

Need help?

Do you have a question about the HP ZR2740w and is the answer not in the manual?

General