HP ZR2740w User Manual

Table 4-1 OSD Menu (continued)
Icon Main Menu Submenu Description
Power Saver Enables the power saving feature. Select:
●
On
●
Off
The factory default is On.
Power On Recall Restores power to the monitor following an
unexpected removal of power. Select:
●
On
●
Off
The factory default is On.
Mode Display Displays the resolution, refresh rate and frequency
information on the screen each time the OSD Main
Menu is accessed. Select:
●
On
●
Off
The factory default is On.
Monitor Status Displays the operating status of the monitor each time
the monitor is powered on. Select the location to
display the status to:
●
Top
●
Middle
●
Bottom
●
Off
The factory default is Top.
DDC/CI Support Allows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:
●
On
●
Off
The factory default is On.
Bezel Power LED Turns off the power LED on the front panel of the
monitor. The factory default is On.
32 Chapter 4 Operating the Monitor ENWW

HP ZR2740w Specifications

General

Screen Size	27 inches
Resolution	2560 x 1440
Panel Type	IPS
Aspect Ratio	16:9
Brightness	380 cd/m²
Contrast Ratio	1000:1
Color Support	1.07 billion colors
USB Ports	4 x USB 2.0
Stand Adjustments	Height, tilt, swivel
Viewing Angles	178° horizontal / 178° vertical
Inputs	DisplayPort, DVI
Connectivity	DisplayPort, DVI
Power Consumption	75W (typical)
Response Time	12 ms