To Next Page

To Previous Page

Table 4-1 OSD Menu (continued)

Icon Main Menu Submenu Description

Default Source Selects the default or primary video input signal when

the monitor is connected to two active and valid video

sources. The monitor will automatically determine the

video format. The choices are:

●

DisplayPort

●

DVI-D

●

HDMI

●

VGA

The factory default is the first active input when

examined in this order: DisplayPort, DVI-D, HDMI,

VGA.

Auto-Switch Source Lets you prevent the monitor from automatically

switching to another active input when the current

input becomes inactive. If you set Auto-Switch Source

to Off, the monitor will go dark rather than scan for

another active input.

Source Detection This option is displayed in the OSD when a

DisplayPort input is selected. You can set Source

Detection to:

●

Always Active

●

Low Power

The factory default is Low Power.

Exit Exits the OSD menu screen.

34 Chapter 4 Operating the Monitor ENWW

Other manuals for HP ZR2740w

Questions and Answers:

Need help?

Do you have a question about the HP ZR2740w and is the answer not in the manual?

General