Management Ethernet port LEDs
A management Ethernet port has one LINK LED and one ACT LED to show its link and data transmission status.
Table 18: Management Ethernet port LEDs description
LED mark Status Description
LINK O The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
ACT O The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
10/100/1000Base-T autosensing Ethernet port LEDs
Table 19: 10/100/1000Base-T autosensing Ethernet port LED description
LED status Description
Steady green The port has a link and is operating at 1000 Mbps.
Flashing green The port is sending or receiving data at 1000 Mbps.
Steady yellow The port has a link and is operating at 10/100 Mbps.
Flashing yellow The port is sending or receiving data at 10/100 Mbps.
O No link is present on the port.
1/10GBase-T autosensing Ethernet port LEDs
Table 20: 1/10GBase-T autosensing Ethernet port LED description
LED status
Description
Steady green The port has a link and is operating at 10 Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow The port has a link and is operating at 1 Gbps.
Flashing yellow The port is sending or receiving data at 1 Gbps.
O No link is present on the port.
Ports and LEDs 69
To Next Page
Loading...
