HPE Aruba Networking 2930M

HPE Aruba Networking 2930M Safety and Regulatory
Information
For important safety, environmental, and regulatory information, see Safety and Compliance
Information for Server, Storage, Power, Networking, and Rack Products, available at
http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts.
HPE Aruba Networking 2930M Switch Safety and Regulatory
Information
HPE Aruba Networking 2930M Switches
Environmental
Operating Temperature:
All switches except the JL324A:
n
0°C to 55°C (32°F to 131°F) up to 5000 ft
n
0°C to 50°C (32°F to 122°F) up to 10000 ft (Reduce 1°C for every 1000 ft above 5000 ft.)
JL324A switch:
n
32°F to 113°F (0°C to 45°C) up to 5000ft
n
32°F to 104°F (0°C to 40°C) up to 10000ft (reduce 1°C for every 1000ft above 5000ft)
Important:
The maximum operating temperature for an Aruba 2930M switch is 50°C (122°F) (or 45°C
(113°F) for the JL324A only) if any of the following transceivers are installed in the switch:
n
J9150A HP X132 10G SFP+ LC SR Transceiver
n
J9151A HP X132 10G SFP+ LC LR Transceiver
n
J9152A HP X132 10G SFP+ LC LRM Transceiver
n
J9153A HP X132 10G SFP+ LC ER Transceiver
n
JH231A HP X142 40G QSFP+ MPO SR4 Transceiver
n
JH232A HP X142 40G QSFP+ LC LR4 SM Transceiver
n
JH233A HP X142 40G QSFP+ MPO CSR4 Transceiver
Relative Humidity:
15% to 95% at 40°C (104°F) non-condensing
Non-Operating
Temperature:
-40°C to 70°C (-40°F to 158°F) up to 15000 ft
Non-Operating Relative
Humidity:
15% to 90% at 65°C (149°F)
Maximum Operating
Altitude:
3.0 km (10,000 ft)
Non-Operating Altitude:
4.6 km (15,000 ft)
Safety-EU EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013 EN62368-1, Ed. 2
Safety- World Wide IEC60950-1:2005 Ed.2; Am 1:2009+A2:2013 IEC62368-1, Ed. 2
Start Here: Installation, Safety, and Regulatory Information 9