Complete the following steps:
a. Complete the following fields:
• User's Full Name
• Username
• Password
• Confirm Password
b. (Optional) Click User Management to specify another non-root user.
c. Click Next.
3. On the Release Notes screen, click Next.
4. (Conditional) Let the YaST2 popup time out.
Complete this step if the system issues a popup here.
5. On the Hardware Configuration screen, click Next.
6. On the Installation Completed screen, click Finish.
7. Proceed to Installing the foundation software on a SLES 11 platform MC990 X server on page
40.
Installing the foundation software on a SLES 11 platform
MC990 X server
The following procedure explains how to install the Foundation Software on an MC990 X server that hosts
the SLES 11 operating system.
To install the Foundation Software on a SLES platform from the direct-attached console:
Procedure
1. Access the installation software.
Insert the HPE Foundation Software CD into the MC990 X server chassis DVD drive.
2. log in to the computer as the root user.
3. Click Computer > YaST to start the YaST interface.
4. Click Software > Software Repositories to start the SLES repository manager.
5. On the Configured Software Repositories screen, click Add.
6. On the Media Type screen, select DVD, and click Next.
7. On the YaST pop up, click Continue.
8. (Conditional) On the Import Untrusted GnuPG Key, click Import.
Perform this step if this is the first time through this process and you need to confirm the security of
the digital key.
9. On the Configured Software Repositories screen, click OK.
40 Installing the foundation software on a SLES 11 platform MC990 X server
To Next Page
Loading...
