EasyManua.ls Logo

HPE Integrity rx2800 i2 series User Manual

HPE Integrity rx2800 i2 series
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HPE Integrity rx2800 i2 Server User
Service Guide
Part Number: AH395-9013J
Published: September 2017
Edition: 13
Abstract
This document contains specific information that is intended for users of this Hewlett Packard
Enterprise product.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HPE Integrity rx2800 i2 series and is the answer not in the manual?

HPE Integrity rx2800 i2 series Specifications

General IconGeneral
BrandHPE
ModelIntegrity rx2800 i2 series
CategoryServer
LanguageEnglish

Summary

Overview

Server Subsystems

Details about the server's internal components, I/O, and RAID support.

Controls and Ports

Describes front and rear panel controls, ports, and storage devices.

Site Preparation

Server Dimensions and Weight

Provides dimensions and weight specifications for rack or pedestal mounting.

Grounding

Details requirements for safety ground/protective earth for the building and server.

Server Electrical Specifications

Covers system power specifications, including input voltage and current.

Installing the Server

Safety Information

Crucial safety precautions for preventing injury and equipment damage during installation.

Preventing Electrostatic Discharge

Guidelines to prevent damage to system components from static electricity discharge.

Installation Sequence and Checklist

Step-by-step guide for installing the server, including cable connections.

Rack Installation

Instructions for installing the server into HPE or third-party racks.

Pedestal Kit Installation

Procedures for attaching pedestal kit components for vertical server mounting.

Operating System Procedures

Operating Systems Supported

Lists the HP-UX, OpenVMS, and Windows Server versions supported by the server.

Installing the Operating System

Procedures for installing OS from DVD/tape, Ignite-UX, Infoserver, or Virtual Media.

Booting and Shutting Down HP-UX

Guides on adding HP-UX to boot options, standard boot, and shutdown procedures.

Booting and Shutting Down OpenVMS

Instructions for adding, booting, and shutting down OpenVMS operating systems.

Booting and Shutting Down Microsoft Windows

Procedures for adding, booting, and shutting down Windows OS on the server.

Optional Components

Installing a Hot-Pluggable SAS Hard Drive

Steps for installing SAS hard drives into the server's front-accessible bays.

Installing a Hot-Swappable Power Supply

Guide for installing an optional second power supply for redundancy.

Troubleshooting

Troubleshooting Methodology and Tools

General approaches, tools like LEDs, and diagnostic methods for server issues.

Component-Specific Troubleshooting

Details on Front Panel LEDs, System Health LED, SID LEDs, and SAS disk drive LEDs.

System Process Troubleshooting

Guidance for boot process, firmware, console, and server environment issues.

Removal and Replacement Procedures

Server Components List

A list of server components with their corresponding spare part numbers.

Safety and Preparation

General safety, ESD prevention, and preparation steps before component service.

Server Handling and Power Management

Procedures for extending server from rack, powering off, and removing from rack/pedestal.

Component Replacement Procedures

Guides for replacing key components like hard drives, power supplies, and fans.

System Board Replacement

Detailed instructions for removing and installing the main system board.

Related product manuals