EasyManuals Logo

HPE Integrity rx2800 i2 series User Manual

HPE Integrity rx2800 i2 series
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Overview
Table 1: Hardware specifications for the server
Component Server
Processors One or two Itanium dual-core or quad-core processors:
1.6-GHz Dual-core Processor 10-MB cache
1.46-GHz Quad-core Processor 16-MB cache
1.73-GHz Quad-core Processor 20-MB cache
Memory Supports up to twenty-four Double Data Rate 3 (DDR3) DIMMs mounted on
expansion boards that attach to the system board.
Supported DIMM sizes are as follows:
2 GB
4 GB
8 GB
16 GB
Minimum memory configuration is 4 GB (2 x 2-GB DIMMs).
Maximum memory configuration is 384 GB (24 x 16 GB DIMMs).
NOTE:
For additional restrictions on memory configuration, see Installing DIMMS
Installing DIMMs on page 67.
Disk drives One to eight hot-plug SAS hard drives
PCI slots I/O riser options:
One full height full length PCIe x8 and two low profile PCIe x4 slots
One full height full length PCIe x8 and one low profile PCIe x8 slots
SAS controller Eight port SAS controller or eight port SAS controller with internal RAID
LAN ports Four GigE LAN ports
Table Continued
Overview 11

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE Integrity rx2800 i2 series and is the answer not in the manual?

HPE Integrity rx2800 i2 series Specifications

General IconGeneral
BrandHPE
ModelIntegrity rx2800 i2 series
CategoryServer
LanguageEnglish

Related product manuals