HPE Integrity rx2800 i2 series User Manual

• Install the component as described above.
Removing and replacing the intrusion switch cable
The intrusion switch screws face CPU 0.
Procedure
1. Power off the server (Powering off the server).
2. Remove the access panel (Removing the access panel).
3. Remove the PCI riser cage (Removing the PCI riser cage).
4. Open the processor cage.
5. Using a screwdriver, remove the switch.
6. Unplug the mating connector.
170 Removing and replacing the intrusion switch cable

HPE Integrity rx2800 i2 series Specifications

General

Brand	HPE
Model	Integrity rx2800 i2 series
Category	Server
Language	English