Drive activity LED status Drive status LED
status
Indication
Off Regularly flashing
amber (1 Hz)
A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.
Off Off The drive is offline, a spare, or not configured as
part of an array.
Table 23: SAS disk drive LEDs : HBA mode
Drive activity LED status Drive status LED
status
Indication
Off, or flashing Alternating amber
and blue
The drive has failed, or a predictive failure alert has
been received for this drive; it also has been
selected by a management application.
Off, or flashing Blue The drive is operating normally, and it has been
selected by a management application.
Flashing irregularly Regularly flashing
amber(1 Hz)
The drive is active, but a predictive failure alert has
been received for this drive. Replace the drive as
soon as possible.
Flashing irregularly Off The drive is active, and it is operating normally.
Off Amber A critical fault condition has been identified for this
drive. Replace the drive as soon as possible.
Off Regularly flashing
amber(1 Hz)
A predictive failure alert has been received for this
drive. Replace the drive as soon as possible.
Off Off The drive is online.
Off Off Normal operation; no activity
Optical drive
The server has one SATA DVD+RW drive. This device has one activity LED.
Troubleshooting 99
To Next Page
Loading...
Need help?
General