(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp (Q)uit
Select>
7. Use the Import command to import the Window boot option file.
Select> i
Enter IMPORT file path: \EFI\Microsoft\WINNT50\Boot0001
Imported Boot Options from file: \EFI\Microsoft\WINNT50\Boot0001
Press enter to continue
NOTE:
Your output might not exactly match the output shown here.
8. Enter Q to quit the NVRBOOT utility.
9. Exit the console and iLO MP interfaces. Press Ctrl-B to exit the system console and return to the iLO
MP Main Menu. To exit the MP, enter X at the Main Menu.
Booting the Microsoft Windows operating system
Use UEFI Boot Manager menu to choose the appropriate Windows item from the boot options list. See
Shutting down Microsoft Windows on page 55 for details on shutting down the Windows operating
system.
Procedure
1. From the UEFI Boot Manager choose an item from the boot options list to boot Windows.
2. Access the UEFI Boot Manager menu for the server on which you want to boot Windows.
3. Log in to the iLO MP, and then to choose the system console, enter CO.
4. Confirm that you are at the UEFI Boot Manager menu (the main UEFI menu). If you are at another
UEFI menu, choose the Exit option from the submenus until you return to the screen with the UEFI
Boot Manager heading.
5. At the UEFI Boot Manager menu, choose an item from the boot options list. Each item in the boot
options list references a specific boot device and provides a specific set of boot options or arguments
to be used when booting the device.
6. Press Enter to initiate booting using the chosen boot option.
7. After the Windows operating system begins loading, wait for the SAC to become available.
8. The SAC interface provides a text-based administration tool that is available from the system
console. For details, see the SAC online help (enter ? at the SAC> prompt).
Loading.: Windows Server 2003, Datacenter
Starting: Windows Server 2003, Datacenter
Starting Windows...
**************************************************************************
******
Computer is booting, SAC started and initialized.
Use the "ch -?" command for information about using channels.
54 Booting the Microsoft Windows operating system
To Next Page
Loading...
Need help?
General