Extending the server from the rack
Procedure
1. Pull down the quick release levers on each side of the server.
2. Extend the server from the rack.
WARNING:
To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately
stabilized before extending a component from the rack.
3. After performing the installation or maintenance procedure, slide the server back into the rack, and
then press the server firmly into the rack to secure it in place.
WARNING:
To reduce the risk of personal injury, be careful when pressing the server rail-release latches and
sliding the server into the rack. The sliding rails might pinch your fingers.
134 Extending the server from the rack
To Next Page
Loading...
Need help?
General