HPE Integrity rx2800 i2 series User Manual

To replace the component, reverse the removal procedure.
Removing and replacing the processor baffle
CAUTION:
To prevent damage to the server, never power on a server without a processor baffle or processor in
each processor socket. The processor baffle is needed for proper system cooling.
CAUTION:
Immediately install a processor baffle in an empty processor socket. To avoid damage to the socket
pins, the socket must never be uncovered for more than 5 seconds. If the socket is damaged, the
entire system board must be replaced.
Procedure
1. Power off the server and remove it from the rack (Powering off the server and Removing the server
from the rack).
2. Remove the access panel (Removing the access panel).
3. Open the processor cage.
Removing and replacing the processor baffle 159

HPE Integrity rx2800 i2 series Specifications

General

Brand	HPE
Model	Integrity rx2800 i2 series
Category	Server
Language	English