Use the "?" command for general help.
SAC>
NOTE:
Your output might not exactly match the output shown here.
9. Exit the console and iLO MP interfaces when finished using them.
10. Enter Ctrl-B to exit the console and return to the iLO MP Main menu. To exit the iLO MP, enter X at
the Main menu.
Shutting down Microsoft Windows
Shut down the Windows operating system on Integrity servers by using the Start menu or the shutdown
command.
CAUTION:
Do not shut down Windows using SAC restart or shutdown commands under normal
circumstances.
Issuing a restart or a shutdown at the SAC> prompt causes the server to restart or shut down
immediately, and can result in the loss of data.
Instead use the Windows Start menu or the shutdown command to shut down gracefully.
To shut down Windows use either of the following methods.
• Choose Shut Down from the Start menu and choose either Restart or Shut down from the pull-down
menu.
The Restart menu item shuts down and restarts the server. The Shut down menu item shuts down the
server.
You can use this method when using a graphical interface to the server.
• Issue the shutdowncommand from the Windows command line.
You can issue this command from a command prompt through the Special Administration Console or
from any other command line.
The Windows shutdown command includes the following options:
/s
Shuts down and halts (power off) the server. This is the equivalent of Start –>Shut Down, Shut
down. To power on the server, use the iLO MP PC command.
/r
Shuts down and restarts the server. This is the equivalent of Start –>Shut Down, Restart.
/a
Aborts a server shutdown.
/t xxx
Sets the timeout period before shutdown to xxx seconds. The timeout period ranges from 0–600,
with a default of 30.
Shutting down Microsoft Windows 55
To Next Page
Loading...
Need help?
General