HPE ProLiant MicroServer Generation 8 (Gen8)
Intel® Celeron® G1610T (2.3Hz/2-core/2MB/35W) Processor
Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor
NOTE: Intel® Celeron® G1610T and Intel® Pentium® G2020T support up to 1333MHz DDR3 memory
Intel® Core™ i3-3240 (3.4GHz/2-core/3MB/65W) Processor
NOTE: Intel® Core® i3-3240 support up to 1600MHz DDR3 memory speed.
Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor
NOTE: Intel® Xeon® E3-1220Lv2 supports up to 1600MHz DDR3 memory speed.
Cache Memory
3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium and Xeon processors.
NOTE: For Dual-core Celeron processor.
All processor models above list the L3 Cache associated with that particular processor.
For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo.
4GB (1 x 4GB) PC3L-12800E DDR3 UDIMM
16GB (2 x 8GB) PC3-12800E DDR3 UDIMM
HPE memory from previous generation servers are not fully compatible with the HPE
ProLiant MicroServer Gen8.
HPE Ethernet 1Gb 2-port 332i Adapter
Notes
1 PCIe 3.0/2.0* x16 x16 Low Profile
NOTE: * Processor dependent. Xeon is PCIe 3.0. Celeron and Pentium are PCIe 2.0.
NOTE: ** Indicates the number of physical electrical lanes running to a PCI-e connector.
ROM (Read Only Memory) is now digitally signed using The Hewlett Packard Enterprise
Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental
programming and preventing malicious efforts to corrupt system ROM.
To Next Page
Loading...
Need help?
General