HPE ProLiant MicroServer Gen8 User Manual

QuickSpecs
HPE ProLiant MicroServer Generation 8 (Gen8)
Standard Features
Page 4
USB 3.0 Ports
2 total (2 rear)
NOTE: Functional after OS boot.
Network RJ-45 (Ethernet)
2 (Port 1 shared for HPE iLO4 as optional configuration)
Industry Standard
Compliance
ACPI V2.0b Compliant
PCIe 2.0 Compliant
PXE Support
WOL Support
USB 2.0
USB 3.0
SATA Gen 2
SATA Gen 3
Server Power Cords
The MicroServer models ship standard with a 6' country specific NEMA power cord. If customers
require an
alternative local power cord, they can check the power cord matrix for the appropriate
country specific sku. Please see the following power cord matrix:
http://www.hp.com/go/powercordmatrix
.
Power Specifications
To review typical system power ratings use the HPE Power Advisor which is available via the online
tool located at URL: http://www.hp.com/go/proliant-energy-efficient
or
http://www.hp.com/go/hppoweradvisor.
NOTE: See Technical Specifications section at end of QuickSpecs for Power Specifications.
Power Supply
One (1) 150 Watts Non-Hot Plug, Non redundant Power Supply
System Fans
One (1) - Non-redundant system fan shipped standard
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on The Hewlett Packard Enterprise Certified and Supported
ProLiant Servers for OS and Virtualization Software and latest listing of software drivers
available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
and our driver download page: http://www.hp.com/support/MicroServerGen8
Graphics
Integrated Matrox G200 video standard
• 1280 x 1024 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)

HPE ProLiant MicroServer Gen8 Specifications

General

Brand	HPE
Model	ProLiant MicroServer Gen8
Category	Server
Language	English