Power supply specifications
Depending on the installed options and/or the regional location where the server was purchased, the server is
configured with one of the following power supplies:
• ATX 350W non-hot-plug power supply on page 135
• ATX 550W non-hot-plug power supply on page 135
• HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply on page 136
CAUTION: Check the system and power supply input ratings before powering up the server.
ATX 350W non-hot-plug power supply
Specification Value
Input requirements
Rated input voltage
100 VAC to 240 VAC
Rated input frequency 50 Hz to 60 Hz
Rated input current
4.5 A at 100 VAC
1.9 A at 240 VAC
Maximum rated input power
437 W at 100 VAC
416 W at 240 VAC
BTUs per hour
1491 at 100 VAC
1419 at 240 VAC
Power supply output
Rated steady-state power
350 W at 100VAC to 240VAC
Maximum peak power
385 W at 100VAC to 240VAC
ATX 550W non-hot-plug power supply
Specification Value
Input requirements
Rated input voltage
100 VAC to 240 VAC
Rated input frequency 50 Hz to 60 Hz
Rated input current
6.4 A at 100 VAC
2.62 A at 240 VAC
Table Continued
Specifications 135
To Next Page
Loading...
