HPE ProLiant ML110

Front panel LEDs and buttons
Item Description Status Definition
1 Power On/Standby button
and system power LED
1
Solid green Normal
Flashing green Performing power-on sequence
Solid amber System in standby
Off No power present
2
2 Health LED
1
Solid green Normal
Flashing green iLO is rebooting.
Flashing amber System degraded
3
Flashing red System critical
3
3 NIC status LED
1
Solid green Linked to network
Flashing green Network active
Off No network activity
1
When all three LEDs described in this table simultaneously, a power fault has occurred. For more information, see Front
panel LED power fault codes on page 9.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the front I/O cable is disconnected.
8 Component identification