7. Connect each power cord to the power source.
8. Power up the server on page 23.
9. Enable the increased cooling function on page 56.
The installation is complete.
Enable the increased cooling function
The server generates more heat when it is installed in a rack. To maintain proper cooling, increase the fan
speed.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Advanced Options > Fan and Thermal Options > Thermal Configuration.
2. Select Increased Cooling
3. Save your setting.
Power supply options
Depending on the installed options and the regional location where the server was purchased, the server can
be configured with one of the following power supplies.
Hot-plug power supply calculations
For more information on the hot-plug power supply and calculators to determine server power consumption in
various system configurations, see the Hewlett Packard Enterprise Power Advisor website (http://
www.hpe.com/info/poweradvisor/online).
56 Hardware options installation
To Next Page
Loading...
