11. Install the drive cage in box 1.
12. Connect the drive cables.
13. Install the LFF hot-plug drives.
14. Install the system air baffle on page 31.
15. Install the PCI air baffle on page 30.
16. Install the front bezel on page 28.
17. Install the access panel on page 26.
18. Do one of the following:
• Server in rack mode: Install the server into the rack on page 53.
• Server in tower mode: Return the server to an upright position.
19. Connect all peripheral cables to the server.
66 Hardware options installation
To Next Page
Loading...
