EasyManua.ls Logo

HPE StoreFabric SN3600B

HPE StoreFabric SN3600B
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HPE B-series 32Gb SAN Switches
Getting Started Guide
Part Number: 870876-002
Published: March 2017
Edition: 2
Abstract
This document provides information on installing, configuring, and maintaining the HPE
StoreFabric SN3600B 32Gb Fibre Channel Switch or HPE StoreFabric SN6600B 32Gb Fibre
Channel Switch.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HPE StoreFabric SN3600B and is the answer not in the manual?

HPE StoreFabric SN3600B Specifications

General IconGeneral
BrandHPE
ModelStoreFabric SN3600B
CategorySwitch
LanguageEnglish

Summary

Electrostatic Discharge and Grounding Recommendations

Setup and Install

Installing the SN3600 B Switch in a Rack

Details installing the SN3600B switch in an HPE rack using the Rack Mount Kit, including required items.

Installing the HPE StoreFabric SN6600 B 32 Gb FC Switch in a Rack

Details installing the SN6600B switch in an HPE rack using the Rack Mount Kit, including safety cautions.

Installing a Standalone Switch

Steps to install the SN3600B or SN6600B switch as a standalone device, including unpacking and applying rubber feet.

Login and Configuration

Connecting the Serial Cable

Procedure for connecting the serial cable to the switch and workstation, including terminal emulator settings.

Logging in to the Serial Console Port

Steps to log in to the switch via the serial console port using default credentials after POST.

Setting the IP Address

Procedure to configure a static IPv4 or IPv6 address for the switch using the ipaddrset command.

Installing Transceivers

Verifying the Configuration

Verifying the Configuration

Steps to verify the switch configuration using LEDs and CLI commands like switchshow and fabricshow.

Backing up the Configuration

How to upload the switch configuration to a server for backup using the configupload command.

Installing and Activating Port Upgrade Licenses

Procedure to purchase, obtain, and install port upgrade licenses using CLI commands.

Configuring Zones and Selecting Devices

Powering the Switch On and Off

LEDs

Specifications

Related product manuals