HM-T300 User Manual
3) Pull the end of the roll straight toward you. Then press down on both sides of the printer cover to close it
firmly.When you close the printer cover, make sure that it is closed on both sides.
4) Use the tear bar to cut the extra paper.
CAUTION
When ERROR lamp is flashing, please make sure the cover is closed correctly. If it’s not, open the
cover and close it correctly.
When the paper is jammed, be sure to open the printer cover before removing the jammed paper.
Do not under any circumstances try to pull out the jammed paper forcefully while the printer cover
is closed, doing so may damage parts of the printer.
To Next Page
Loading...
