HPRT HT130 User Manual

HT100/HT130 User Manual
Rev.1.2
16
3.2 Power Connection
1.Make sure the printer’s power switch is in the off position.
2.Connect the AC adapter to power receptacle.
3.Connect the power cord to AC adapter.
4.Connect the other end of power cord to the outlet.
Note
：
 Use the original power adapter only. Avoid the damage caused by charging improperly.
 Please unplug the printer power cord if it is not in use for a long time.

HPRT HT130 Specifications

General

Brand	HPRT
Model	HT130
Category	Printer
Language	English