HPRT HT130 User Manual

HT100/HT130 User Manual
Rev.1.2
17
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
The standard for the printer’s interface cable shows in the following.
- USB B-Type Cable
- RS-232C Cable
- RJ45 Cable
Please follow the instructions to connect the cable.
1. Make sure the printer is turned off.
2. Please plug in the cables.
-Insert the USB B-Type cable into the USB port.
-Insert the RS-232C cable into the serial port.
-Insert the RJ45 cable into the ethernet port.
3.3.2 Bluetooth Connection
PDA with Bluetooth interface, laptop and other information terminals can drive the mobile
thermal printer. Instructions as follows:
1. Power on printer.
2. Primary device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose HT100/130.
4. Finish pairing.
Detailed pairing methods, please refer to primary devices Bluetooth Names. After pairing,
primary devices with virtual Bluetooth interface (smart phone , pocket PC, palm, notebook) can
drive mobile thermal printer to print through such virtual Bluetooth interface.
Note: The original code is 1234.

HPRT HT130 Specifications

General

Brand	HPRT
Model	HT130
Category	Printer
Language	English